FEATURED PRODUCTS

Small enough to stay discreet, sharp enough to be noticed. The Tiny Pendulum is a four-sided sterling silver pendulum, 17.5 mm long (loop not included), that tapers to a fine point. Its flat faces are polished bright and its edges stay crisp, so every surface catches the light.

*FOUR SIDED PENDULUM PENDANT *All PENDANTS are made to order and generally take about 2 to 3 weeks.  *All PENDANTS are also available in 10K, 14K, or 18K yellow, white or rose gold,  *PENDULUM measures 17.5 MM (not including top loop) *Shown on a 1.2 mm sterling silver chain. ALSO AVAILABLE IN 10K,14K, and 18K. Sold Separately *ALL UPGRADED ORDERS*** YOU WILL BE CONTACTED BY CUSTOMER SUPPORT TO CONFIRM AND FINALIZE ALL MEASUREMENTS AND MATERIAL SELECTION. WHEN ADDING STONES, 3 OF THE FOUR SIDES HAVE STONES. ONE SIDE IS LEFT PLAIN FOR MATERIAL STAMP AND COMPANY LOGO STAMP.

Never Fear Truth. The NFT Jim Skull takes the same flat-top skull as the Original Jim Skull — defined brow, hollow eyes, full row of teeth — and uses the flat planes on each side as a canvas: NEVER cut into the left side, TRUTH across the forehead, FEAR down the right, each letter hand-engraved in a rough, tattoo-style script and darkened so it reads from across the room. The eyes are where you make it yours. Leave them open, or have them set with stones: diamonds, rubies, blue sapphires.

*All rings are handmade in the USA in Sterling Silver (Nickel FREE) .  *All rings are made to order and generally take about 2 to 3 weeks.  *From the top of the ahead to the bottom of the teeth measures approximately 15mm. *All jim skull rings are sold with a hollow back, that’s how the mold was made originally.  You do have the option to make it solid back when selecting your size and material. *All rings are also available in 10K, 14K, or 18K yellow, white or rose gold, platinum and  palladium . Prices available upon request. *Stones and engraving can be added to most rings.    Prices available upon request.  

A chain made of skulls. The Cyclops Link bracelet is a row of small sterling silver skulls, each one cast and finished individually, joined to the next by a round link so the bracelet moves freely on the wrist. Each skull has a single eye socket and the skulls are set facing alternate directions along the chain.

*All  bracelets  are handmade in the USA in Nickel FREE Sterling Silver.   *All bracelets are made to order and generally take about 2 to 3 weeks.  *All bracelets are also available in 10K, 14K, or 18K yellow, white or rose gold, platinum and  palladium . Prices available upon request. *Stones and engraving can be added to most rings.    Prices available upon request.   ***VERY IMPORTANT When selecting the  length  of this bracelet. Measure  you’re  wrist then add 1″ to the to the length so the bracelet fits  properly.

One ring, two fingers. The Two Finger Skull and Crossbones ring joins two round bands with a solid, polished bridge and sets a flat-top skull at the center — two hollow eye sockets, a nasal cavity and a row of upper teeth, no lower jaw. From each side of the skull a bone runs outward along the fingers, ending in knobbed joints, so the whole piece reads as a single skull-and-bones motif stretched across the hand.  Seen from the back, the two bands and the bridge form one clean, continuous shape. 

*All rings are handmade in the USA in Nickel FREE Sterling Silver.   *All rings are made to order and generally take about 2 to 3 weeks.  *All rings are also available in 10K, 14K, or 18K yellow, white or rose gold, platinum and  palladium . Prices available upon request. *Stones and engraving can be added to most rings.    Prices available upon request.   *THIS RING IS NOT MEANT TO BE USED AS A WEAPON.

One eye, no distractions. The Cyclops Skull ring strips the skull down to its essentials: a smooth, high-domed cranium, a heavy brow, a single round eye socket set dead center, a small nasal cavity and a row of rounded upper teeth — no lower jaw, so the ring sits close to the finger. The whole surface is polished to a mirror finish, so the smooth dome catches the light while the eye socket and the gaps between the teeth stay dark and sharp. The wide band flows straight out of the skull without a seam. Handmade in the USA in nickel-free sterling silver and made to order in your size, it's one of the studio's most recognizable designs. The single eye takes a stone beautifully: black onyx, a ruby or a diamond, on request.

*All rings are handmade in the USA in Nickel FREE Sterling Silver.   *All rings are made to order and generally take about 2 to 3 weeks.  *All rings are also available in 10K, 14K, or 18K yellow, white or rose gold, platinum and  palladium . Prices available upon request. *Stones and engraving can be added to most rings.    Prices available upon request.  

The Claddagh, made to be worn every day. On the Large Next Gen Claddagh ring two hands reach in from either side of the band to hold a smooth, high-polished heart, with a three-pointed crown sitting above it. The hands are the detail that sets it apart: long, slender fingers, each one modeled separately, wrapping around the heart from below, with a cuff marked at each wrist where the hands meet the band. The heart is left clean and bright so it catches the light, while the recesses between the fingers and inside the crown stay dark.

*Approximately 17 mm from top of the crown to bottom of the heart and a 5.5 mm band. *All rings are handmade in the USA in NICKEL FREE Sterling Silver.  *All rings are made to order and generally take about 2 to 3 weeks.  *All rings are also available in 10K, 14K, or 18K yellow, white or rose gold, platinum and  palladium . Prices available upon request. *Stones and engraving can be added to most rings.    Prices available upon request

A sacred heart in solid silver. The Next Gen Sacred Heart ring is built around a full, rounded heart polished to a mirror finish, with a crown of thorns wrapped horizontally around its middle — each thorn modeled individually, so the band of thorns stands out in relief against the smooth surface of the heart.

*Approximately 17 mm from top off the flames to bottom of the heart and a 7 mm band. *All rings are handmade in the USA in NICKEL FREE Sterling Silver.  *All rings are made to order and generally take about 2 to 3 weeks.  *All rings are also available in 10K, 14K, or 18K yellow, white or rose gold, platinum and  palladium . Prices available upon request. *Stones and engraving can be added to most rings.    Prices available upon request

A heart on fire. The Flaming Heart Pendant sets polished flames on a rounded sterling silver heart of about 20 mm, with a darker, textured background to make them stand out. Handmade in the USA in nickel-free sterling silver and made to order in about 2 to 3 weeks. Also available in 10K, 14K or 18K gold (yellow, white or rose), platinum or palladium; prices are available upon request. Stones and engraving can be added, also with prices on request. Chain sold separately (shown here on a 2.8 mm link chain).

The pattern of diamond plate, cast in solid sterling silver. The Diamond Plate cuff takes the tread pattern of checker plate and turns it into a bracelet that looks like it came off a workshop floor: pointed, diamond-shaped ridges set on the diagonal along the full length of the cuff, each one polished bright against a dark, finely stippled ground.

11 MM OR 7 MM WIDE  *All bracelets are handmade in the USA in Nickel FREE Sterling Silver  *All bracelets are made to order and generally take about 2 to 3 weeks.  *All bracelets are also available in 10K, 14K, or 18K yellow, white or rose gold, platinum and palladium. Prices available upon request. *Stones and engraving can be added.  Prices available upon request.